User Profile
Collapse
-
what is odd is that four packages were scheduled to be delivered by Amazon truck and all indicated that they left the warehouse at the same minute which...Last edited by LCHIEN; Today, 04:34 PM. -
ah frustrations.
This weekend I needed some misc parts and particularly a 6" skinny drill bit ASAP I ordered from Amazon due to arrive Tuesday.
So I actually...Last edited by LCHIEN; Today, 12:50 PM. -
One last observation for the rip fence locking handle, the threaded end hanging out is exactly one inch long and only half of it is threaded and only... -
what would be the easy and cheap source of some steel strips
.150 to .180 thick. (approx 4 mm)
.250 to .265 wide (approx 6.3-6.7 mm)
a few inches long (at least 2 inches)
Probably...Last edited by LCHIEN; Yesterday, 09:17 PM. -
Actually, I'm getting an inspiration for a arbor lock wrench.
Let me mull it over....Leave a comment:
-
FOr the blade wrenches, you really need the back end of either one the BT3000 supplied wrenches - to lock the arbor while you use a hex wrench to turn...Last edited by LCHIEN; Yesterday, 08:43 PM.Leave a comment:
-
LV has a combo kit with the three "imperial" plug sizes for $52
and they have a Veritas flush cut saw for $32+
But they also have...Last edited by LCHIEN; Yesterday, 12:07 AM. -
First ten band-aids included free.
After that you won't be able to apply them anymore, haha....Last edited by LCHIEN; Yesterday, 12:08 AM.Leave a comment:
-
Yes, that should be real easy, I just went and checked and measured.
The thread in the fence cam lock is 1/2-13 threaded as per my nut and...Last edited by LCHIEN; Today, 02:10 AM.Leave a comment:
-
Welcome to the "club"
I have a BT3 Saw FAQ (Freq asked Questions) that has a lot of good info... the FAQ is linked in my signature...Last edited by LCHIEN; Yesterday, 02:11 AM.Leave a comment:
-
Real or fake?
I would argue its fake.
There seems to be no saw blade height adjustment. or means of bevel angle adjustment.
No Fence...Leave a comment:
-
lets hear the comments.
yeah ok, I'll just throw this one out, seen on Reddit.
... -
seldom ever see coupons for eBay items.
ALso may be available on Amazon.
https://www.amazon.com/Complete-Clam...ket-bracket-as...Leave a comment:
-
Is Anycubic Kobra 2 Plus a good starter machine, refurb its $160 or so, Aside from filament anything else needed to start?Last edited by LCHIEN; 05-07-2024, 02:54 AM.Leave a comment:
-
I just wood-glued a short piece of 3/8" dowel into the hole which was a snug fit, and after it cured, took a flush cut saw to it.
So...Leave a comment:
-
I'd sure like to learn more about 3-D printing and get a machine.
How do you get started and not have to buy everything twice?...Leave a comment:
-
I presume you need some kind of gear box oil.
Here's an article on choosing gear box oil properties.
https://www.machinerylubrication.com/Read/926/gear-oils#:~:text=Choosing%20an%20appropriate%20viscosi...Last edited by LCHIEN; 05-06-2024, 04:14 AM.Leave a comment:
-
Plug cutters
Got a set, kinda looks like these.
I presume the top ones are for making tapered plugs, right?
I went to make some plugs...Last edited by LCHIEN; 05-06-2024, 01:11 AM. -
To answer my last question I measured the OD of several hoses including two PU 1/4" ID hoses, two rubber hoses 3/4" ID and one nylon coiled...Last edited by LCHIEN; 05-06-2024, 05:07 PM.Leave a comment:
No activity results to display
Show More
Footer Ad
Collapse
Leave a comment: