Sarge's Membership

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • pelligrini
    Veteran Member
    • Apr 2007
    • 4217
    • Fort Worth, TX
    • Craftsman 21829

    Sarge's Membership

    I was looking for some info in an old thread and I noticed that SARGE..g-47 posts were now set to guest. Like the one at the bottom of this page:http://www.bt3central.com/showthread...andflex&page=2
    I know he was taking some time off earlier, but I wonder if one of the reasons we haven't heard anything is that he's not registered anymore. Is his guest status like what happened to MilDoc? or something else?
    Erik
  • Bill in Buena Park
    Veteran Member
    • Nov 2007
    • 1865
    • Buena Park, CA
    • CM 21829

    #2
    Erik - I noticed this some time ago as well, and had similar questions. I wanted to search some of Sarge's old posts - but this doesn't seem to work when the userID isn't active. As this appeared to happen in proximity to a season of heated exchange between mods and some others regarding inflammatory posts (including a cameo by Jeff Schronce, who commented on the exchanges), I settled on my own conclusions.
    Bill in Buena Park

    Comment

    • sweensdv
      Veteran Member
      • Dec 2002
      • 2862
      • WI
      • Baileigh TS-1040P-50

      #3
      If you go to the Members List and click on what seems to be any letter you'll notice blank spots where it would appear a member used to be listed. Is it possible there are more members out there that just sorta disappeared?
      _________________________
      "Have a Great Day, unless you've made other plans"

      Comment

      • Black wallnut
        cycling to health
        • Jan 2003
        • 4715
        • Ellensburg, Wa, USA.
        • BT3k 1999

        #4
        I'll be looking into this! To the best of my knowledge Sarge should not be banned.

        In the case of Mildoc I was not able to reverse his closed member account however I was able to manually readd him with a new username. Other than spammers almost no one has been banned intentially.
        Donate to my Tour de Cure


        marK in WA and Ryobi Fanatic Association State President ©

        Head servant of the forum

        ©

        Comment

        • LinuxRandal
          Veteran Member
          • Feb 2005
          • 4889
          • Independence, MO, USA.
          • bt3100

          #5
          Originally posted by Black wallnut
          I'll be looking into this! To the best of my knowledge Sarge should not be banned.

          In the case of Mildoc I was not able to reverse his closed member account however I was able to manually readd him with a new username. Other than spammers almost no one has been banned intentially.
          You sure about that? I figured we don't see Jeff anymore because the mods wives decided he was to hazardous to your pocketbook!


          Humor, not to be taken seriously.
          She couldn't tell the difference between the escape pod, and the bathroom. We had to go back for her.........................Twice.

          Comment

          • cabinetman
            Gone but not Forgotten RIP
            • Jun 2006
            • 15218
            • So. Florida
            • Delta

            #6
            Originally posted by LinuxRandal
            You sure about that? I figured we don't see Jeff anymore because the mods wives decided he was to hazardous to your pocketbook!


            Humor, not to be taken seriously.
            My wife doesn't.

            .

            Comment

            • Black wallnut
              cycling to health
              • Jan 2003
              • 4715
              • Ellensburg, Wa, USA.
              • BT3k 1999

              #7
              If anyone has Sarge's email please PM it to me, or shoot him an email and ask him to email me.
              Donate to my Tour de Cure


              marK in WA and Ryobi Fanatic Association State President ©

              Head servant of the forum

              ©

              Comment

              • LarryG
                The Full Monte
                • May 2004
                • 6693
                • Off The Back
                • Powermatic PM2000, BT3100-1

                #8
                Originally posted by Black wallnut
                If anyone has Sarge's email please PM it to me, or shoot him an email and ask him to email me.
                PM on the way.
                Larry

                Comment

                • Black wallnut
                  cycling to health
                  • Jan 2003
                  • 4715
                  • Ellensburg, Wa, USA.
                  • BT3k 1999

                  #9
                  Thanks Larry! Email sent.
                  Donate to my Tour de Cure


                  marK in WA and Ryobi Fanatic Association State President ©

                  Head servant of the forum

                  ©

                  Comment

                  • Black wallnut
                    cycling to health
                    • Jan 2003
                    • 4715
                    • Ellensburg, Wa, USA.
                    • BT3k 1999

                    #10
                    Drats, email addy was no longer good.
                    Donate to my Tour de Cure


                    marK in WA and Ryobi Fanatic Association State President ©

                    Head servant of the forum

                    ©

                    Comment

                    • pelligrini
                      Veteran Member
                      • Apr 2007
                      • 4217
                      • Fort Worth, TX
                      • Craftsman 21829

                      #11
                      Does anyone know him any any other forum? Might be able to send him an email or PM from there.

                      Larry mentioned 'various talk forums' earlier this year. http://www.bt3central.com/showthread.php?t=52993
                      Erik

                      Comment

                      • LarryG
                        The Full Monte
                        • May 2004
                        • 6693
                        • Off The Back
                        • Powermatic PM2000, BT3100-1

                        #12
                        Okay, another PM is on the way ...
                        Larry

                        Comment

                        • Old Dutchman
                          Forum Newbie
                          • Oct 2011
                          • 38
                          • Holland Mi
                          • My BT3000

                          #13
                          I don't know if this helps You out, Some years ago, I had a membership here, and could get on with no problem. When I became disabled, I let a few of the forums just sit. B3 was one of them. I tried to get back on-line many times, to no avail. I could sign up, but nothing ever showed up in the page, or My R-mail account. A month ago, or so, I started from new, with win 7. Now I could get back on. It would be funny if I am the only one who could not get on!
                          I have Hope, and I am Thankfull! Consider WhoWhoGreated it ALL

                          Comment

                          • Bruce Cohen
                            Veteran Member
                            • May 2003
                            • 2698
                            • Nanuet, NY, USA.
                            • BT3100

                            #14
                            While we're doing the "Missing in Action" bit, enyone know what's up with DUD (Bill)

                            Bruce
                            "Western civilization didn't make all men equal,
                            Samuel Colt did"

                            Comment

                            • Shep
                              Senior Member
                              • Nov 2008
                              • 710
                              • Columbus, OH
                              • Hitachi C10FL

                              #15
                              Or for that matter uncle cracker?
                              -Justin


                              shepardwoodworking.webs.com


                              ...you can thank me later.

                              Comment

                              Working...