I've been procrastinating for so long to get started on this, thinking I'd want to add more planes as soon as I got done. Months later, I've added no planes. It was time to free some shelf space up for other stuff, and to use up some plentiful plywood cutoffs at the same time. This was part of a modular cabinet build that I think I'll be taking up next year.
All scrap 3/4" white birch plywood, except for the back which is 1/2". The shelf ledges are 3/4" pine. I'll hit it with some sort of finish. I have magnets for the planes setting up right now, and I'll add some sort of dividers, probably more of that pine. The shelves can be removed and replaced without taking the cabinet apart, which will make it useful even when I outgrow it with planes. I'm planning on picking up felt or soft shelf liner tomorrow.
Not too sure what I'll put on the top shelf. Unfortunately it's too short for chisels.
All scrap 3/4" white birch plywood, except for the back which is 1/2". The shelf ledges are 3/4" pine. I'll hit it with some sort of finish. I have magnets for the planes setting up right now, and I'll add some sort of dividers, probably more of that pine. The shelves can be removed and replaced without taking the cabinet apart, which will make it useful even when I outgrow it with planes. I'm planning on picking up felt or soft shelf liner tomorrow.
Not too sure what I'll put on the top shelf. Unfortunately it's too short for chisels.
Comment