Some members asked me to post my "No Measure" BT3 alignment method again. I have uploaded a .pdf version to my album here at BT3 Central. "Ryobi_Forum_w-pics.pdf"
The plans for the alignment tool are in a separate .pdf file in the album. "01_Saw-set.pdf"
Click here to go to the album ...
http://www.bt3central.com/forum/memb...F=No%2DMeasure
I have used this method to align my BT3000 for years. I hope that you can use it too.
I also recommend looking at this link for more tips ...
http://benchmark.20m.com/tools/BT3100/bt3100index.html
... especially the 5-cut method of squaring the miter fence to the blade.
http://benchmark.20m.com/tools/BT310...XcutFence.html
- Lonnie
The plans for the alignment tool are in a separate .pdf file in the album. "01_Saw-set.pdf"
Click here to go to the album ...
http://www.bt3central.com/forum/memb...F=No%2DMeasure
I have used this method to align my BT3000 for years. I hope that you can use it too.
I also recommend looking at this link for more tips ...
http://benchmark.20m.com/tools/BT3100/bt3100index.html
... especially the 5-cut method of squaring the miter fence to the blade.
http://benchmark.20m.com/tools/BT310...XcutFence.html
- Lonnie
Comment