phenolic sheet available (sporadically)

[tribalwind]

dangit, i got hit with the micro torque bug, had to re-write this one,ah well..

anywho, theres some 'so so' pics below,i'll get better ones made up,
thicknesses are mostly 1/2" and 3/4" a couple are 1"thick!!(or more?)

i would guess this is GG grade phenolic resin panels? .its cutoffs from partitions(you'd think there'd be a cheaper material they could use!)
sizes run the gammit, some VERY wide/tall pieces(3'x5',15"x80", some, Lots under 10"x48", some 12-24"x12-48"
various color laminate surfaces,black,white,green,marble/wood etc.
http://photobucket.com/albums/v74/tribalwind/phenolic/

As for prices theres too many pieces to list individually now, say $15 sq.ft for 1/2" and $20 fro 3/4". i guess just gimme your Minimum dimensions and make me a fair offer (good/fair for you)for orders over $30,id rather not make lots of post office trips for 1 $10 router plate,unless it's a group/volume order?) . check woodcraft/rockler/mcmaster-carr for comparisons and then beat it by say 20% ?? or more for large pieces. something fair to all.im open/negotiable.

also open to bartering for wood, tools, books, mags, plans, videos, dvds, hardware etc..? just include actual shipping to your locale from baldwin,11510. i dont know yet how big/heavy UPS/Fedex/USPS will ship but this stuff is very dense/heavy, i'll weigh a "boardfoot" and post it here.
any Q's please let me know.

[kgworkman]

quote:Originally posted by jxyoung

Craftsman micro torque wrench $26 off. Now $48. 9/16 to 9/18

I would consider something else.
These do not have lifetime warranty, Husky@HD,and HF ones do. I have both and the Husky is better in 1/2" drive size due to 250

[Ken Massingale]

quote:Originally posted by jxyoung

Craftsman micro torque wrench $26 off. Now $48. 9/16 to 9/18

I would consider something else.
These do not have lifetime warranty, Husky@HD,and HF ones do. I have both and the Husky is better in 1/2" drive size due to 250

[tribalwind]

quote:Originally posted by jxyoung

Craftsman micro torque wrench $26 off. Now $48. 9/16 to 9/18

I would consider something else.
These do not have lifetime warranty, Husky@HD,and HF ones do. I have both and the Husky is better in 1/2" drive size due to 250

[boblon]

quote:Originally posted by jxyoung

Craftsman micro torque wrench $26 off. Now $48. 9/16 to 9/18

I would consider something else.
These do not have lifetime warranty, Husky@HD,and HF ones do. I have both and the Husky is better in 1/2" drive size due to 250

[foneman]

yes

quote:Originally posted by jxyoung

Craftsman micro torque wrench $26 off. Now $48. 9/16 to 9/18

I would consider something else.
These do not have lifetime warranty, Husky@HD,and HF ones do. I have both and the Husky is better in 1/2" drive size due to 250

[tribalwind]

a few pics'

i managed to snap off a few quick ones before leaving for work this morning.
all pieces are 1/2" and 3/4" (most 3/4)
theres more pieces up in the loft/rafters i didnt shoot.and small squares/strips not shown yet either.

i also have a bunch of the superficial laminate material they cover the phenolic with, like 1/16" thick, these are 2-3' square or more. white,marble,wood patterns etc.

[tribalwind]

found some site listing 3/4" at 5.5lbs per sq.foot. i guess that'd make the 1/2" about 3.7lbs? HTH'

[gjat]

Thanks for the phenolic you sent. Perfect.