Dual additional miter slots. I want one.

[sparkeyjames]

I have seen this attachment and now have a need for it. If someone could provide me with the
part number from whoever makes this I would apreciate it.

Apologies to the person who's shop pic I swiped. This shows you exactly the part I am looking for.

[timb]

It's a "hard to get" part - kind of. Here is a recent ebay auction for one.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=019&sspagename=STRK%3AME WA%3AIT&viewitem=&item=290095849443&rd=1&rd=1

there's usually one listed on ebay but always seems to be an auction

[scmhogg]

Sparky,

Try this

http://www.m-and-d.com/TTI-4060310.html

Steve

[timb]

looks like you can get it here for $36 + the usual

http://www.m-and-d.com/TTI-4060310.html

[scmhogg]

Your a minute late timb.

[timb]

Beat me to it

You can also make your own.

https://www.sawdustzone.org/articles...for-the-bt3000

There's another article I saw about attaching it better. Can't find it immediately

[sparkeyjames]

Thanks guys.

[Hoakie]

here's one I built using an inset slot from the woodsmithstore

http://www.bt3central.com/showthread...974#post252974

[gaj1967]

I ordered mine about a week ago and found out they are backordered.

This part is back-ordered. At this time, the ETA is April 6, 2007. This
is the estimate provided by the manufacturer. The parts could come in
sooner, or occasionally the wait is longer. We will ship them as soon
as they arrive unless you let us know you'd prefer to cancel.

[softop41]

sparkey,
I have one that I used on my saw for a couple years 'till I made one for each side of my saw. It shows the use but still works like it did when it was new. PM me if you're interested.
Jerry