Tweet
What type saw blade is in your TS at this minute?
-
14918-24T bulk ripper6.71%1030T glue line ripper0.67%136-40T general purpose53.02%7950T combination21.48%3260T crosscut6.71%1080T crosscut6.04%980T Hi-ATB ply/veneer/melamine blade1.34%2other4.03%6Last edited by Knottscott; 06-16-2007, 11:25 AM.Happiness is sort of like wetting your pants....everyone can see it, but only you can feel the warmth.
-
Ridge Carbide TS2000 TK which is a 40t combination blade
Last edited by Thom2; 06-16-2007, 11:25 AM.If it ain't broke.. don't fix it!!!... but you can always 'hop it up'
**one and only purchaser of a BT3C official thong** -
well the last operation was ripping a bunch of stock so I put the ripper in, normally you'd find my Forrest WWII 40T combo.
Loring in Katy, TX USA
If your only tool is a hammer, you tend to treat all problems as if they were nails.
BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questionsComment
-
WW2 in mine most of the time...Keith Z. Leonard
Go Steelers!Comment
-
24T ripper on this morning - ripping face frames.
Also have a 48T and 60T combo blades
and an 80T I use for ply and crosscuts.GaryComment
-
Freud 60T for crosscut hardwoods, Freud 24T when ripping hardwoods, Freud 50T combo for other wood (pine, fir)
RAGS
Raggy and Me in San Felipe
sigpic
Comment
-
WWII - ALL the time for me.
Downunder ... 1" = 25.4mmComment
-
There's an Infinity 50T Combomax TK in their now, but on any given day it's just as likely to be a 40T WWII TK, or LU88. There's a 30T WWII TK scheduled for delivery in July.
I'll also use a DW7124TK or Leitz 24T TK ripper for bulk work.Happiness is sort of like wetting your pants....everyone can see it, but only you can feel the warmth. Comment
-
Freud 60 T TK crosscut
WayneWayne JComment
-
Currently Tenryu 40 tooth .... soon to be a Ridge Carbide TS2000TK 40 tooth"Experience: that most brutal of teachers. But you learn, my God do you learn". by C.S. LewisComment
-
The stock Freud-made blade that came with my BT.
g.Smit
"Be excellent to each other."
Bill & TedComment
-
ditto.....but I do have a irwin 40t new I might try.....it came with my clampsComment
-
CMT 24 T full kerf on the cabinet saw... Freud 6" dado stacked to 3/4" BT..Comment
Comment